If you are suffering from elongated pants that are just too uncomfortable for you. But they fit perfectly from the waist and you don’t wanna spend any more money.
Well, I’m here to tell you some easy methods with which you can hem your pants and shorten them to a comfortable length.
Let’s get into it!
Can You Shorten Baseball Pants?
To put it simply, yes you can shorten your baseball pants. There are several methods to shorten your baseball pants. You can have them altered to your desired length, you can either shorten them at home or through a professional. So it’s not the end of the world if you got some long pants.
Tools You Need for Tailoring Baseball Pants
There are some basic tools that you must consider when hemming the bottom of baseball pants. You must have a tailoring machine, scissors, needles, and thread, chalk you must also have a measuring tape. These instruments are enough for you to work with and get you the hemmed baseball pants that you need.
How to Hem Baseball Pants
Determine The Length
The first step that is important to note and talk about is to first determine the length of where you want the length of your pants to end exactly. After determining this, you can move on to the next step.
Prepare the Pants
Turns the pants inside out. If there is fabric, you may need to remove the stitching on the existing hem to create a clean edge. Use a seam ripper or small scissors to carefully unpick the stitches.
Measure and Mark
Measure the amount you want to shorten from the bottom of the pants and mark the cutting line with a pin or chalk. Ensure that the cutting line is straight and even throughout both legs.
Cut the Excess Fabric
You must use sharp scissors or fabric shears to cut along the line that you just made. You must be careful when cutting, the cut should be made perfectly and neatly around the line that you just made.
Create a New Hem
Fold up the fabric to create a new hemline. Depending on the amount you shortened the pants, you can try and fold it once or twice just to see what is perfect for you and catered to your taste perfectly. Then make sure that the fabric is placed evenly on both sides and you can proceed to the next step.
Sew The New Hem
Using a sewing machine or needle and thread, sew a new hemline. If you are using a sewing machine use either a zigzag stitch or straight stitch. If you are looking for the perfect type of sewing machine then here are a few options to consider buying the brother’s sewing machine they make the perfect stitches with the finesse you need. Another option to consider buying is the SINGER sewing machine they are on the pricier end, but are quite quick to work with.
Trim The Excess Fabric
If there is the fabric after creating the new hem, you can trim it off, and leave a small seam allowance. Use scissors to carefully trim any excess fabric.
Press and Try it On
Well, there you have it. The last step is to just iron the hem and get it pressed neatly. Then try it on and see if it’s perfect, if they require any other adjustments be sure to note them down and make the necessary changes.
How to Hem Pants Without Sewing Machine
Determine The Length
Determining precisely where you want the length of your baseball pants to end is the first step that is crucial to notice. Once you’ve done that there might be a hem present, open the hem. Once the hem is open, take a measuring tape and then mark the line where you want the hem to be made.
Cut the Excess Fabric
To cut along the mark you just made, use sturdy scissors or fabric shears. When cutting, you must use caution; the cut must be made precisely and neatly around the line you just drew.
Create a New Hem
The fabric should be folded up to form a new hemline. You can try folding the trousers once or twice to discover what works best for you and suits your taste, depending on how much you shortened the trousers. Then, make sure the fabric is positioned equally on both sides before moving on to the following step.
How To Get The New Hem
So if you don’t have a sewing machine then you can go with the common needle and thread, just pin up the lines, like you normally would. Then you use the needle and thread to follow the lines and sew them properly.
Press and Try it On
That’s all there is to it. The hem has to be simply ironed and nicely pressed as the final step. Once you’ve done that, put it on to see if it fits perfectly. If not, make the necessary adjustments.
Conclusion
Well there you have it, these are a few methods suggested here that will help you gain a better understanding of how to shorten your pants and make them all the more perfectly fit you. So I hope this article gave you all the steps and things you need to know about hemming your pants and making them to your desired length.
